Contact Us
TEL: +86-510-86235788
Fax: +86-510-86235778
Phone: +8613801527110
Address: No.01 Zhouhuan Road, Zhouzhuang Town, Jiangyin, Jiangsu, China
Home > Knowledge > Content
Self-adhesive wallpaper tutorial and service life of Pvc furniture film roll
Jun 27, 2018

Pvc furniture film roll is effective to a certain extent, according to the characteristics of the workpiece's line type, in the use of different thickness of the choice of silica gel film, silica gel film is often heated and stretched, the sag will increase, should be based on silica gel The degree of sag of the membrane is installed in time to reduce sag.

When the Pvc furniture film roll is used, in order to extend the service life of the silicone film, it can effectively prevent the production quality problems of the workpiece to a certain extent. To a certain extent, the use direction of the silica gel film should be changed periodically, such as changing the front end and the left end. Right end. If the corners of the silicone film produce holes or short cracks, repair can be performed with silicone and a patching machine. During the repair, the surface is compacted with a flat weight. After drying for 24 hours, the repair site can be normally used with sandpaper 240#.

Pvc furniture film roll self-adhesive wallpaper tutorial

1. Wipe the dust, grease, and other contaminants on the surface to be pasted and dry them. (The surface to be adhered should be smooth, dust-free, and not wet).

2. Hold the sticker before the sticker to mark the location, and then measure the cut.

3. From top to bottom, carefully affix the cut wallpaper, and gradually remove the back of the backing paper. While removing the bottom paper, use a soft cloth or towel to gently smooth the edges of the wallpaper from both sides. Bubbles are discharged to ensure a smooth effect.

4. If you have attached bubbles, use a needle and run off the air.

Previous: Pvc film stretching production

Next: Self-adhesive wallpaper tutorial and service life of Pvc furniture film roll